Daystate Wolverine B-Lite .25 Mag

[Nutcracker]

Today I decided change the magnet & pin, so I can load on rights side. I wanted to do this so I can more easily use a SF wheel. Well It functioned , but the mag moved left to right every time I cycled a pellet. Why does it do this? I changed it back and it does not do this.

 

[zx10wall]

"Nutcracker"Today I decided change the magnet & pin, so I can load on rights side. I wanted to do this so I can more easily use a SF wheel. Well It functioned , but the mag moved left to right every time I cycled a pellet. Why does it do this? I changed it back and it does not do this.

That doesn't make any sense. They designed it to load from either side. Take a look at the video:

Did you try the magnet in both orientations, flipping it around and seating it? 

 

[Nutcracker]

No, I did not try it on the right side with the magnet in its original position. I would really like to load it from the right, but something is not right, like I said it will function, but moves a lot from left to right.

 

[zx10wall]

Maybe try the magnet in different positions and flipping it over too. 

 

[Nutcracker]

"zx10wall"Maybe try the magnet in different positions and flipping it over too. 

Here is a post , the fellow was experiencing same thing. About 5th post down.
http://www.daystateforum.com/viewtopic.php?f=5&t=617