Looking to sell a very nice Daystate/Ataman Tsar FT rifle.
Rifle is in great overall condition. Wood has no issues, the blue anodizing of the action is not as bright as it was when it was new, but it looks good. The anodizing on the top rail has worn thin and the aluminum under shows, but your scope rings or mount will cover this if it's an issue.
I didn't like the unfinished factory barrel so I put a carbon fiber sleeve over it which is held in place by a small bit of epoxy. There is also a 1/2x20 thread adapter on the barrel, also held by a dab of epoxy and set screws. Barrel band has been removed but I still have it, and the butt hook extension piece is there but not in the picture.
Factory regulator replaced with Huma reg and adjusted down to shoot 8.4gr JSB at around 790fps, but can be adjusted back up for full power. I'll send the factory reg with the rifle so you have both. If I remember correctly, the factory reg was doing ~770fps on average, but the spread and deviation was not that great. Also wouldn't give you higher power if you wanted it.
Great looking, accurate and interesting rifle. Don't really want to sell, but have other toys on the way!
Asking $1500 shipped in the CONUS. Scope, rings and scope base are not included. Please email me at tobinwebster at yahoo dot com or message me here for questions and/or offers. I will try to get some more photos of it soon if I can.
Thanks for looking!
Rifle is in great overall condition. Wood has no issues, the blue anodizing of the action is not as bright as it was when it was new, but it looks good. The anodizing on the top rail has worn thin and the aluminum under shows, but your scope rings or mount will cover this if it's an issue.
I didn't like the unfinished factory barrel so I put a carbon fiber sleeve over it which is held in place by a small bit of epoxy. There is also a 1/2x20 thread adapter on the barrel, also held by a dab of epoxy and set screws. Barrel band has been removed but I still have it, and the butt hook extension piece is there but not in the picture.
Factory regulator replaced with Huma reg and adjusted down to shoot 8.4gr JSB at around 790fps, but can be adjusted back up for full power. I'll send the factory reg with the rifle so you have both. If I remember correctly, the factory reg was doing ~770fps on average, but the spread and deviation was not that great. Also wouldn't give you higher power if you wanted it.
Great looking, accurate and interesting rifle. Don't really want to sell, but have other toys on the way!
Asking $1500 shipped in the CONUS. Scope, rings and scope base are not included. Please email me at tobinwebster at yahoo dot com or message me here for questions and/or offers. I will try to get some more photos of it soon if I can.
Thanks for looking!
