Can anyone tell me the proper size & durometer of the 2 O-rings on the Revere fill probe, please?
With luck there will be a few in my kit
Thanks
Edward
With luck there will be a few in my kit
Thanks
Edward
- The AGN App is ready! Search "Airgun Nation" in your App store. To compliment this new tech we've assigned the "Threads" Feed & "Dark" Mode. To revert back click HERE.
Daystate Daystate Revere Fill Probe O-Ring size, please
- Thread starter SilentSquirrel
- Start date
what's a durometer? I need to have replacement o-rings for my fill probe o-rings. But I ain't gonna pay $10 for 4 of them. I'll go to my local hardware store and buy them out. I'm sure they would appreciate the business.
Upvote 0
Durometer or shore is the hardness of the o-ring. The higher the number, the harder/stiffer it is.
O-Ring Durometer - Why is Shore A Hardness Import? : The O-Ring Store LLC, We make getting O-Rings easy!
The O-Ring Store LLC : O-Ring Durometer - Why is Shore A Hardness Import? - O-Ring Cord for Versatile and Custom Sealing Solutions OSK™ Assorted O-Ring Kits OSK™ O-Ring Repair Kits OSK™ Hydraulic Cylinder Seal Kits OSK™ Air Nailer O-Ring Kits OSK™ Sanitary & Brewery Gaskets O-Ring Lubrication...
www.theoringstore.com
Upvote 0
Sry I thought you just worded your original question wrong and was asking what durometer the orings should be. I thought you knew what durometer meant. @Peskådot671 added in the blanks tho.
Upvote 0
Now back to the original question..........
What is the O-ring size & durometer for a Daystate Revere fill probe?
Please
Thanks
Edward
What is the O-ring size & durometer for a Daystate Revere fill probe?
Please
Thanks
Edward
Upvote 0
YES!
I got a few from AOA while ordering something else.
They said the O-rings are id 4.5mm / cs 1.5mm /NBR 70 durometer
If I need to replace again, I'll use polyurethane in the same size/duro
Hope this helps
Edward
I got a few from AOA while ordering something else.
They said the O-rings are id 4.5mm / cs 1.5mm /NBR 70 durometer
If I need to replace again, I'll use polyurethane in the same size/duro
Hope this helps
Edward
Upvote 0