Daystate Daystate Pulsar O-ring sizes

[fatboy58]

Hi,

Does anyone have the O-ring sizes of an Daystate Pulsar ?

Tnx in advance,

Fatboy

 

[anirudh]

Pulsar Disassembly Guide - Daystate

daystate.com

see this link..if you can find out about the orings here though i see no mention of that.supporting video also available in youtube..look for DAYSTATE. or perhaps a email to Daystate could help...Afterall they have already uploaded the assembly/disassembly info of this PCP amongst others.BTW they have started to mention correct o ring sizes for all their current models..but sadly NO for the Pulsar.

 

[fatboy58]

Pulsar Disassembly Guide - Daystate

daystate.com

see this link..if you can find out about the orings here though i see no mention of that.supporting video also available in youtube..look for DAYSTATE. or perhaps a email to Daystate could help...Afterall they have already uploaded the assembly/disassembly info of this PCP amongst others.BTW they have started to mention correct o ring sizes for all their current models..but sadly NO for the Pulsar.

Thanks anirudh, I will check this with Daystate.

 

[Arzrover]

A Pulsar is a Red Wolf in bullpup form so the Red Wolf oring specs will be the exact same within the same caliber. That should make your sear easier. You don't give a caliber so making a list is more difficult. The only differences between calibers will be the breech seals and exhaust valve seal in HP form. The Standard has a smaller breech end on the barrel, so the barrel seals will be smaller on it.
Bob

 

[fatboy58]

Thanks Bob, I have 2 Pulsars, 1 in 0.177 and 1 in 0.22 . Both FAC but no HP. Both 43 cm barrel.
The 0.22 has a small leake....about 1 bar/24 h. The 0.22 is years old and the other 6. First " problem " ever
I've also mailed Daystate for an o-ring list of the Pulsar....don't know if they answer soon

Regards,

Fatboy