I have been playing with a series of the Daisy 747,777 and a 722 pistol. The 722 is one of the lower grades, in .22 cal. Today I replaced the narrow, serrated, plastic trigger with a wider model as found in the higher grade 747 and 777 models. It was a rather straightforward job, taking about 30 minutes, going slow. In reality it probably did not reduce the acutal pull, and on this model there is no pull adjustment as on the higher grade models, but the wider face to me makes it feel less. I got everything back together, eyeballed the elevation adjustment as you have to take the rear sight off to disassemble,, went outside and it is dead on for 10 meter soda cans.