Last night I had a heck of a time removing the cylinder from my Steyr LP50. Is there a specific wrench thats designed to work on these cylinders w/o damaging them? BTW this the only gun I own where I need to remove the cylinder to fill it.
- The AGN App is ready! Search "Airgun Nation" in your App store. To compliment this new tech we've assigned the "Threads" Feed & "Dark" Mode. To revert back click HERE.
Cylinder Wrench
- Thread starter Jspool
- Start date
Depending on how accessible it is, a small strap-wrench might be the tool for that.
Luck,
J~
Luck,
J~
Upvote 0
Spanner wrench of various sizes and design is likely that.
spanner wrench - Google Search
www.google.com
Upvote 0
Spanner wrenches only work upon round objects that heve the correct indentation milled or molded into them for the wrench to take hold.
Upvote 0
If the only way to fill the gun is to remove the cylinder.
How does the the manufacturer recommend the user to remove the cylinder ?
How does the the manufacturer recommend the user to remove the cylinder ?
Upvote 0
Wow. What an excellent design!
I'd clamp the tube in a vise between a couple of pieces of wood while leaving enough room to rotate the rest of the gun a little. Turn the gun, release, reclamp, then repeat until it's loose enough to take off by hand. Then I'd sort out a specialty tool that would make the vise unnecessary. Perhaps padded-jaw pliars or vise-grips.
Edit - Just looked at a pic of one. What I said applies.
J~
Upvote 0
Steyr appears to have machined a hole in the side of their air cylinder for removal and installation, specific to a spanner wrench of the appropriate size.
Upvote 0
You got me excited there! I assumed I had somehow missed ever noticing that! Unfortunately, my gun lacks that feature. Perhaps they added it later. If the is not a specific wrench (I will check directly with Steyr) I will pick up a set of channel pliers that have nylon jaw protectors.
Upvote 0
Generally any air cylinder only requires finger tightening. We are not using gaskets in the pcp world so why stuff is cranked on pcp guns bewilders me. I would pull the barrel then just twist it off now that you can get your hand around it. Then fill it and just finger tighten moving forward.
Upvote 0
I used to just gently snug it up, but at times it has worked its way loose, hence the “more than just snug” tightening. I found some soft jaw plug pliers on Amazon that will do the trick for the rare instance I can’t get the cylinder off easily. Here’s the link in case anyone else has this issue in the future.
Upvote 0