Hey Everyone, a couple of months ago I began on the expensive and addicting path of creating my custom marauder. Back in December I got a .177 marauder and after a couple of weeks of shooting it, I wanted to convert it .25. For a while I flirted with the idea of doing it and decided at the time that I wasn't ready nor experienced enough to do the conversion.
Fast forward to February, I was hunting around the internet and came across hillairgun.com and saw his valve that he made and bought it. I had my .177 shooting 15.74 grain pellets at around 1050. Of course that wasn't enough so I looked into converting it to a .25 cal and decided to go ahead and do it. I felt that I was experienced enough. here is a list of what I put in my rifle.
Fast forward to February, I was hunting around the internet and came across hillairgun.com and saw his valve that he made and bought it. I had my .177 shooting 15.74 grain pellets at around 1050. Of course that wasn't enough so I looked into converting it to a .25 cal and decided to go ahead and do it. I felt that I was experienced enough. here is a list of what I put in my rifle.
- Hill maximum performance valve
- Hill higher flowing transfer port
- 1/2" OD shroud mount
- the 17lb hammer spring from Jefferson State Air Rifles
- Baker Airguns Marauder Big Bore breech
- ..25 barrel from alliance hobby