Anyone ever work on one ?
I got one shot out of it and it seems like it plugged up !
I dont even think the BB came out of the barrel.
I got one shot out of it and it seems like it plugged up !
I dont even think the BB came out of the barrel.
- The AGN App is ready! Search "Airgun Nation" in your App store. To compliment this new tech we've assigned the "Threads" Feed & "Dark" Mode. To revert back to a traditional "Forum List" view, and/or "Light" mode click HERE.
Crosman 1600 Powermaster BB
- Thread starter JAYj
- Start date
First, empty the unfired bbs out of the magazine.
Gently run a soft .177 cal cleaning rod from muzzle to breech, see if you can dislodge any obstructions. Maybe you can dislodge the previously loaded bb. Could be an old, rusty bb is clogging the bore.
These have a double-action type trigger pull. Does it go “pow” when you cycle the trigger again? Maybe you’ve lost all ur Co2
If it has pressure, try loading 1 bb and see if it will shoot.
These guns aren’t hard to dismantle, but the donut-type seal inside the grip(where the tip of the ctg seals) can be replaced without tearing the whole gun down. I can use the tip of a screwdriver in one of the notches on the threaded retaining collar to do so.
It’s a 38T type seal, T-Mac has them.
That’s All I got, without more info about ur problem.
Gently run a soft .177 cal cleaning rod from muzzle to breech, see if you can dislodge any obstructions. Maybe you can dislodge the previously loaded bb. Could be an old, rusty bb is clogging the bore.
These have a double-action type trigger pull. Does it go “pow” when you cycle the trigger again? Maybe you’ve lost all ur Co2
If it has pressure, try loading 1 bb and see if it will shoot.
These guns aren’t hard to dismantle, but the donut-type seal inside the grip(where the tip of the ctg seals) can be replaced without tearing the whole gun down. I can use the tip of a screwdriver in one of the notches on the threaded retaining collar to do so.
It’s a 38T type seal, T-Mac has them.
That’s All I got, without more info about ur problem.
Upvote 0
Thanks Skillet I'll give that a shot .
Yes could be a Powermatic,didnt have it in front of me when I posted Mark.
Yes could be a Powermatic,didnt have it in front of me when I posted Mark.
Upvote 0
those bb repeaters are hard shooters....that's a decent bb gun... the guy that needed his fixed used to pop squirrels with it....humanely....(i guess at point blank - idk)....
Upvote 0
Well, I took it apart last weekend and it looked like somebody dump motor oil in it !
Cleaned it up and lubed it works great except for the shot/worn cartridge seal ,just ordered a new one .
Will keep you posted
Thanx
Cleaned it up and lubed it works great except for the shot/worn cartridge seal ,just ordered a new one .
Will keep you posted
Thanx
Upvote 0
G
Guest
Guest
Go to your local hardware store and find a seal of that size in, say, 70 durometer.
Upvote 0
G
Guest
Guest
You should! All the seals used are, for the most part, standard sizes of varying durometer ratings.
Upvote 0