N/A Crosman 140,Fourth Variant?

[Treerat]

First, Im, new here,great forum. Ive have always lurked.
I ran across a Crosman 140,no spoon and has cast trigger,so from what i find, maybe a fourth variant.
It isnt pretty but it doesnt look bad,it will not hold air.
I have never worked on firearms, but I have rebuilt small engines and other mechanical things. Just curious if I should undertake this or find an air rifle gunsmith. I also want to reblue it, and even tho stock looks rough, I may just put a new finish on it,no heavy sanding.
Is it possible to get a peep site on it , also??
Ive done a few searches and found good info on this site and even a You Tube showing someone repairing a 140.
I would really like talk with someone on this if possible.
Thanks,
John
Im from Louisiana

 

[xsarfc9x]

They're not hard to reseal. Only issue is the quad seal can be a pain to get in. Id give Rick at Precision Pellet a call. He has parts and reseal kits and is very knowledgeable.

If you search for Crosman repair manual there are PDFs with instructions. Tried to upload the file but said it was too big

 

[Treefrog]

Those are well worth the effort invested. It will need a pump cup as well as the other seals. Clean the barrel really well while you have it apart and you'll be surprised at how accurate it can be.

Cheers,

J~

 

[Moog]

I have a Crosman 140 and really like it. I've never had it apart so I can't give you any advice on how to fix it but it is well worth the effort to get that rifle going again.
Contact crosman600repair.com. Henry Ford who runs it can repair it for you or you can buy the seal kit from him and do it yourself.

 

[marflow 777]

it might be one that you don't start with
the older Crosman guns tend to be complicated take a look at the parts diagram at Crosman
https://support.crosman.com/hc/en-us/articles/203543150-140-Owner-s-Manual-EVP-1954-1968
wood is an easy fix, the bluing not so much
some parts
https://www.jgairguns.biz/140-and-147-c-78_89_122/
https://philsvintageairgunrepair.com/

 

[JDR]

I am a klutz on fine mechanics and failed with my first reseal job, so I use a vendor. Mike Baker has been honest, talented, and reasonable on Crossman and Sheridan guns he resealed for me. He has resealed several of my Crossman guns plus a Sheridan that was not worth fixing, that he replaced with a resealed one in excellent shape for just the cost of what he had spent to date on the repair. The 2 times I have bought parts from him were cheaper than Ebay.

Mike Baker
12050 E. Ladera CT.
Cornville, AZ 86325
503-706-9512

 

[RickH]

Google Michael’s Lock Stock and Barrel. He rebuilt mine and did an excellent job. He’s in Alabama.

Rick H.