Cricket thread adapter?

If you have a bullpub the tread is m14-1 so you could use a koy with Vulcan treads.. I try it n it fits perfectly... if you have one of the new carbines the barrel comes treaded now but is not m14-1 if you find that tread size let me know..


I don't have a nut to confirm, but here a shot of the barrel end. You're saying the threads are M14-1, correct?

IMG_7341.1609706498.jpg

 
He is saying if the end of the shroud has Vulcan threads not the barrel.

If that's the case AOA has THIS!

WHY PAY MORE?

https://www.airgunsofarizona.com/airgun-silencers/eagle-vision-vulcan-1/2-unf-muzzle-adaptor/

Wonder if the Uragans the same?

Screenshot_2021-01-03-14-44-152.1609721215.png








Guess I wasn't clear enough. Want to eliminate the factory shroud and direct thread a Donny FL KOI.

This is what I'm looking for. But this one is coming from the UK. I want to find it through a US vendor.

https://eaglevisioncam.com/shop/moderator-1-2-unf-adaptor/kalibrgun-barrel-1-2-unf/
 
For those who have a lathe , or know a good machinist ,this is what I did on my Cricket .25 :

- remove the end plug of the shroud by heating gently the shroud on about 2 inches from the end to soften the epoxy glue and , at the same time , grab the plug with some pliers , twisting and pulling.

-carefully clean the inside of the shroud with sandpaper.

- take very carefully the diameter dimension of the plug.

- on the lathe , turn a piece of aluminium at the same dimensions than the original one , but extended by a1/2 UNF thread .

- press the new plug with some epoxy or Loctite into the shroud ; the fit must be VERY snugly.

- screw on the silencer you want.

Here is a pic

IMG_1037.1611437015.JPG