Can anyone tell me the overall length of a cricket MK1 reg for 120/125 bar setting. I'm thinking 54.4 mm but probably wrong. I remember seeing a video somewhere but can't seem to find it. Any help appreciated 
Cricket reg measurement
- Thread starter Boots
- Start date
Maybe this could help : . There are some others video from Ernest Rowe abour Kalibrgun regs.
Upvote 0
Just my thoughts here but I believe going on measurement for a reg setting is not a good practice. It's one thing to take a measurement for the reg in your hand, rebuild it and put IT to the same measurements. It's a whole different animal to expect those same measurement will accurately apply to a different reg.
Upvote 0
I've done 4 at the same measurement and all been around the 120/125 bar mark When falling off the reg on chrono
Upvote 0
In my opinion , the best way is to use a reg pressure tool , like the Huma.
Unfortunately , it works only for Huma reg ; I think that for Kalibrgun your need an adapter. By the way I put Huma regs on all my Crickets and get this tool , it's just so easy to adjust the pressure this way .
Unfortunately , it works only for Huma reg ; I think that for Kalibrgun your need an adapter. By the way I put Huma regs on all my Crickets and get this tool , it's just so easy to adjust the pressure this way .
Upvote 0