Just to clarify that's totally adequate FPE at the Target not at the muzzle.Just need around 40-60 fpe
Upvote 0
Just to clarify that's totally adequate FPE at the Target not at the muzzle.Just need around 40-60 fpe
I only see banter and drivel coming from you. You ask this dude questions, he provides numerous examples, finds a video, and you mince a way to an argument on about every point. At this point I bet you'd argue the color of the sky if he said it was blue. Seems the only motivation you have is to argue and not learn. I wasn't going to say anything until that statement you posted in the quote above, so do some self reflection. I also have no desire to internet special Olympics argue with you, so don't be surprised if you get no further response from me.@Cantona256 All this banter and drivel and not a single link provided detailing specs aside from a video.
Bars slugs, https://www.facebook.com/bars.523253I am really getting into this coyote calling with an air gun. Three times out and all three have resulted in Coyotes wIthin range and only my ignorance preventing success.
Today it all came together. Called two in at once. One got within 35 yards but stayed behind a sagebrush but the other one came into about 5o yards then backed out to 64 yards next to a bush I had ranged before I started calling. I shot it in the lungs with a 30 cal Hybrid slug. The impact was impressive and it left with tail down and moving slow. Unfortunately just over the finger was a thick brush pocket that I am assuming it made it into. A lot of people don’t spend much time looking for wounded coyotes but I ain’t one of them.
At any rate, I was thinking as Ihiked off the hill I should find a slug that will provide a better chance of a complete pass through with better penetration.
Anyone have any suggestions? I am shooting an M3 and it is tuned to shoot the Hybrids (RMR slap slugs) @ 960 fps. The gun is not working too hard to get there and I can get more velocity out of it with these slugs but I am thinking more velocity is not the answer. A slightly harder slug with a smaller hollow point is what I have in mind.
Could I be looking at this wrong? Any help appreciated