Converting Bobcat Mk2 to arrow

Thinking they use a thimble it may be easier than say a crosman or QB?

A short section of the breech end of barrel ( so TP is lined up and pellet probe seals w/out mod) drilled to accept a stainless steel "line" ( aka tube ) just less than the I.D. of an Easton arrow shaft. A drop of silicone oil for improved sealing, maybe wedged into/on an oring so it's a bit harder for the arrow to just fall off. Had some luck usinf a tiny drop of JB weld sanded darn near away as a friction point of the SS tube.

With a sacrificial barrel or ??? you should be able to make , something,, for $8.00.



John
 
IDK if there is even a arrow kit for the bobcat. But for the crown. It's $199 for the arrow barrel and 4 arrows. Install is easy. Simply unscrew the screws holding the barrel and slide in the arrow barrel and lock it back down. Just like changing barrel for different caliber.


I believe I have seen it here in the US as well, but here is one offered for sale in Germany. There is this guy on YouTube that builds his own slingshots and what not... He uses the Bobcat Mk2 Arrow all the time. Fun Fact: In Germany the "regular" air rifle version of the Bobcat Mk2 illegal, but the Arrow version is literally considered a toy!

Anyhow, thanks for the input,

Kmd



https://gogun.de/product/fx-airguns-bobcat-mk2-arrow-profiset/
 
Thinking they use a thimble it may be easier than say a crosman or QB?

A short section of the breech end of barrel ( so TP is lined up and pellet probe seals w/out mod) drilled to accept a stainless steel "line" ( aka tube ) just less than the I.D. of an Easton arrow shaft. A drop of silicone oil for improved sealing, maybe wedged into/on an oring so it's a bit harder for the arrow to just fall off. Had some luck usinf a tiny drop of JB weld sanded darn near away as a friction point of the SS tube.

With a sacrificial barrel or ??? you should be able to make , something,, for $8.00.



John


What!? To technical for me, ha ha. Thanks for the input thought! : )