On page 9 of the M3 manual it says "Do not use the gun if tank pressure is below set regulator pressure" since the M3 has two regulators I reached out to FX and Pyramid air to see which regulator they are talking about and got two different answers.
FXs Answer
"After confirming with a technician, you will use the second regulator as your reference point."
Pyramids Answer
"In order to get the best performance, you would want to keep the pressure in the tank above the first regulator pressure."
My Current Settings
Tank - 250 Bar
1st reg set at - 130 Bar
2nd reg set at - 100 Bar
When do I need to recharge and what is the technical reason for that? Is it actually bad for the gun? I can see the tank dropping below 100 Bar as a problem, but how would it be a problem to drop below 130 since the second would still maintain 100?
FXs Answer
"After confirming with a technician, you will use the second regulator as your reference point."
Pyramids Answer
"In order to get the best performance, you would want to keep the pressure in the tank above the first regulator pressure."
My Current Settings
Tank - 250 Bar
1st reg set at - 130 Bar
2nd reg set at - 100 Bar
When do I need to recharge and what is the technical reason for that? Is it actually bad for the gun? I can see the tank dropping below 100 Bar as a problem, but how would it be a problem to drop below 130 since the second would still maintain 100?