Compressor owner roll-call!

Jump to latest Follow Reply
mcoulter

mcoulter

Member
Dec 16, 2015
1,190
127
Syracuse, NY, USA
Shoebox F10 (purchased used but in great condition)

24 top-offs on my Joe B Tigershark tank and roughly 40 hours of run time.

Replaced one oring (shoebox vent mechanism) at about 20 hours. I now leave that vent alone and vent at my tank.

-------------------------

If you haven't submitted your HPA compressor experience to my survey, you can do it here! http://bit.ly/hpa-compressor-survey

Here is where I'm sharing the results of what's submitted through the survey:

https://www.airgunnation.com/topic/compressor-survey-results/

Thanks!
 
Hi Matt, I would add to your list but I see no listing for the big Benjamin Recharge compressor. Several of us at my airgun club went in on one a year and a half ago when Crosman had their shoot and offered it at a VERY reduced price to the shooters (it had just been announced) We only fill SCUBA and SCBA bottles and not guns unless someone asks to have there gun filled. I have been going to write a thread about our experiences with it but just haven't done it. If you add it to your list I will fill out the survey. No problem!! J.L.
 
Upvote 0
Hi guys, I have added the Benjamin and Bauer compressors to the survey. Try submitting your response again here:

http://bit.ly/hpa-compressor-survey

If you don't see your compressor listed, you may need to try either a different browser or an incognito browser session to bypass the old version being cached by your browser. (For example if you originally opened the survey in Chrome, you may need to try FireFox or an Incognito window in Chrome if you don't see the new choices.

Thanks! 
 
Upvote 0
Did so myself a bit earlier in the day ... Alpha 90 original is going to be 5 this Christmas. Been a good compressor and filled Soooooo many guns and tanks !!!

Tad over 200 hours on the self installed clock & still chugging along.
Click to expand...

Thanks! And it occurred to me today that I have enough data for the various Omega compressors that I should probably break out the survey results for the individual Omega models. 

I'll try to get that done later this week :)
 
Upvote 0
Benjamin Traveller (shaft broke, replaced by Crosman). 11 months of hard service. 

Benjamin Traveller (shaft broke. Looking at replacement part...Make sure to bleed the pressure line before starting the motor!). 12v option, no oil or water needed. Slightly faster than the Xisico.

Xisico CS3 - user induced issue. With help of importer determined that oil over fill was cause. Remedied, work like a champ. Slow but portable. No water needed, 12v option.

YH clone. Works nicely. Needs cooling water. Stays at home. Fills guns and tanks.


 
Upvote 0
You must log in or register to reply here.
Top Bottom
Back
Home
Forums
Resources
Menu