Clearance spray paint!

[iAMzehTOASTY1]

Menards has $5 clearance on the spray paints!
Had to grab some and liven up some of the targets(mainly for visibility)
*needed them for my secret project but while waiting for paint t to dry; figured I'd break out the dull/blend in to the area targets
**got a cheap(no brand- Taiwan made)cast iron pan at a yard sale for $5! Next outing; it's getting PINGED!!

 

[Spartan]

Nice. Be interested to see how that cast iron holds up to pellets. Tends to be very brittle metal. Might get holes and cracks in it real quick. Might work great, though.

 

[iAMzehTOASTY1]

Nice. Be interested to see how that cast iron holds up to pellets. Tends to be very brittle metal. Might get holes and cracks in it real quick. Might work great, though.

It's a well seasoned pan; got it bc it was cheap and I wanna hear that "tink"

 

[jetpopt]

I like that light TINK sound, too. Cheap repurposed stuff as targets is good.

Need to get some spray paint also, for the little spinner target set that looks a lot like the one in your last photo, minus the orange paint. I just stuck the included decals on top of the spinners to cover up the hit marks, but I bet they fall off soon.

 

[Hateful McNasty]

Still my paint was .89¢ now its 2.89$ but then a clearance at $5 is a deal? Then maybe if its the best line of krylon maybe.

 

[iAMzehTOASTY1]

I like that light TINK sound, too. Cheap repurposed stuff as targets is good.

Need to get some spray paint also, for the little spinner target set that looks a lot like the one in your last photo, minus the orange paint. I just stuck the included decals on top of the spinners to cover up the hit marks, but I bet they fall off soon.

I've got 2 sets of spinners now

Still my paint was .89¢ now its 2.89$ but then a clearance at $5 is a deal? Then maybe if its the best line of krylon maybe.

It was uhh...I forget the brand. The "good" stuff I believe

 

[Privateer]

I wanna hear that "tink"

Here's one of my "tink" Targets.

 

[iAMzehTOASTY1]

Here's one of my "tink" Targets.

Nicccce!! I wouldn't mind finding an old cowbell to plink

 

[Privateer]

That's a 1/4" thick plate set at an angle. It deflects hits off 45 degree to the left and slightly up into the woods.
It makes a KILLER richocet sound! I'll see if I can get a recording of it.

 

[iAMzehTOASTY1]

Finally remembered to take a pic of the cans

 

[KWK]

I've done some very nice work with Rustoleum clear enamel. It flows out really nice. Same for the Rusto. colored enamels. Very nice finish to be had.
For profession results I have used this cheap little Harbor freight spray gun. Rustoleum oil paint blown out of it gives a glass like finish. Thinned to the right consistency to allow atomization. Used it for many repairs and restorations. Different mediums. Well worth the $13 investment. Buy the cloth covered airbrush hose kit for it!(upgrade)