Clamp to barrel scope mount adapters
- Thread starter Yo
- Start date
I used a different style/brand that worked well for me:
https://www.amazon.com/UTG-Universal-Single-rail-Rifle-Barrel/dp/B001WJ0CFQ
https://www.amazon.com/UTG-Universal-Single-rail-Rifle-Barrel/dp/B001WJ0CFQ
Upvote 0
Oh that's interesting but looks like that one won't work for a Daisy 777 the barrel is like this.
Upvote 0
I would NOT clamp anything to the barrel, but the shroud or the air tank should be good.
If you clamp too hard on the barrel itself, it will also indent the barrel at the same location. If you have "good" internal mics., you can actually measure the squeeze.
Mike
If you clamp too hard on the barrel itself, it will also indent the barrel at the same location. If you have "good" internal mics., you can actually measure the squeeze.
Mike
Upvote 0
What if an outer tube made from some kind of semi rigid material was used as a shim to distribute the pressure that the clamp bites onto around the shroud?
Upvote 0
I use the Sun Optics mount on both my 777 and 717. I have a mini red dot mounted onto it and the mount works well.
Upvote 0