Just wondering if anyone experience the different chrony readings between using LED light source vs natural sunlight.
I have found the velocities under LED lighting were 80 fps higher on average than when I chrony under natural light.
Is this normal or does anyone knows why there is a difference?
Perhaps the LED lights that I used is not proper? I was using those pot light type LED light with 23 lights. I hung each light puck directly over the sensor under the chrony shades. I was able to record the readings without any problem under LED light. When I did the testings, I made sure there is no other light source in the room to cause interference.
thank you.
I have found the velocities under LED lighting were 80 fps higher on average than when I chrony under natural light.
Is this normal or does anyone knows why there is a difference?
Perhaps the LED lights that I used is not proper? I was using those pot light type LED light with 23 lights. I hung each light puck directly over the sensor under the chrony shades. I was able to record the readings without any problem under LED light. When I did the testings, I made sure there is no other light source in the room to cause interference.
thank you.