CHRICKET CARBINE MINI TRIGGER
- Thread starter douger
- Start date
I don't but I can tell you it is sensitive. A small adjustment on one component has affects on others. You need real time phone help on this one. Charlie Frear walked me through it step by step.
Upvote 0
If it were only that simple...
This can get you started.
Essentially same trigger as the Bullpup.
Hint: unless you have a real problem with the trigger, leave it be.
This can get you started.
Hint: unless you have a real problem with the trigger, leave it be.
Upvote 0
JUST WANT LITTLE MORE FIRST STAGE CREEPAS THERE IS ABOUT ZERO. SECOND IS LIGHT AND VERY PREDICABLE
Upvote 0
The trigger system on the Cricket can only be described as funky. It works, but adjustment is not at all intuitive. Adding a second o-ring did not work for me as it impeded the adjustment's range of motion. I spent a couple of frustrating hours getting mine back to where it started.
Tip: measure the length of the exposed thread on the turnbuckle before you start.
Tip: measure the length of the exposed thread on the turnbuckle before you start.
Upvote 0
ITS GOOD WHERE IT IS JUST NEED TO GET IT PERFECT FOR ME WILLPLAY WITH IT WHEN IGET FEW HOURS TO MAKE SURE ALL DOCUMENTED NOT ROCKET SCIENCE JUST NEED TO WRITE DOWN ALL ADJUSTMENTS AND GO LITTLE AT TIME
Upvote 0
really no factory diagram as to what the screws do I already got the trigger perfect but should be In manual like most other high end guns
Upvote 0
Here's my set of abbreviated instructions:
1. Adjust turnbuckle.
2. Adjust second stage screw.
3. Uh Oh.
4. Punt.
5.
1. Adjust turnbuckle.
2. Adjust second stage screw.
3. Uh Oh.
4. Punt.
5.
Upvote 0