Check these things out!

[stoti]

I have a few speed loaders for my Impact that I bought on line but was talking to Augie a while back who saw my speed loaders and said, “hey, you should get some speed loaders from my buddy Elis R, they are so awesome”. Not long after after I got a hold of Elis and got some of the speed loaders.

I’m not knocking the other speed loaders I have, they work fine but after getting these, there really is no comparison. These are just so much more well thought out, the design is made to “work properly”, the tolerances are absolutely astonishing, the magnets and tolerances hold these things closed until you want to open them. You won’t have to worry about them popping open in your pocket. They look beautiful which is kind of crazy for a 3D printed speed loader. They don’t even look 3D printed because they’re so well made, they have no print lines and to top it off, they come in different colors with other custom features like my screen name and the make of my gun on them.

I have absolutely no affiliation with Elis other than this transaction but wanted to show these off and make you guys aware of his speed loaders because the design, quality and workmanship are off the charts. To say I was pleasantly surprised is an understatement. Thanks Elis!

They can be purchased from Elis Remigio, he goes by Elis5173 here on AGN. He charges $25 for the base model, a little more with extras.

Stoti

 

[FLgunner]

Augie hooked me up with Elis also and I got 4 fof his speed loaders or my Crown and Dreamline, 2 in .25 and 2 in .22. I also have a couple of those other speed loaders and there is no comparison! In fact, one of the other brand speed loader has already failed because of the way it was designed with the friction tab, which has snapped and it no longer stays together. These are much better made and a much more professional looking product!

 

[stoti]

Yeah, the design feature you mentioned is what Augie pointed out too. These are designed so that there is really nothing to break and they’re about as solid as they can be. I know a lot of people already have these and I’m late to the game but they are so much better than the other’s I have, I wanted to share with those that don’t know about them yet. Pretty amazing that a little 3D printed part can be so well thought out and constructed!

Stoti

 

[brawler1588]

Man Augie has been busy i actually didn't own a FX at the time and was working with elis on another 3d project and in that time I picked up that Ernest owned impact again augie set that up thats when he said you need to check out his speed loaders at that point I had already gotten friendly with elis and met up with him, he is a great guy not only serving his country but making bad ads 3d stuff in his spare time. 100% reach out to elis if you want speed loaders or anything 3d he will try and design something for you.

 

[stoti]

That’s kind of funny...Augie hooked you and me up too! 

Just got some JSB Knock Out Slugs in .25 cal today so I thought I’d share one more picture.

Have a great evening.

Stoti

 

[Marco25]

And just something else we need to buy for a FX

 

[qball]

Got couple of speed loaders from Elis and they look great! Just haven’t used them yet.  

 

[Bigragu]

Thanks for the kudos, guys, but bottom line, it was Mr ACRUZ who brought Eli’s into the limelight with those awesome mags. I don’t think anyone paid much attention to ACRUZ’s review of the Eli’s mags, but I sure did. I didn’t waste anytime contacting Elis after reading that review, and when I got my two speedloaders from him I just had to tell the world, lol. So I’m passing on all the “attaboys” to ACRUZ

Ive outfitted a couple of impacts for friends getting into this hobby who knew nothing about pcp’s(but had the $$ to start off with an impact,ha ha) and in completing the impact package I tell them the Eli’s Speedloader is not an option, but a requirement! 

Elis is currently working on a recreation of the barrel cover that goes on a beeman 850 pistol. It’s my neighbors, and he handed the gun to me for a reseal job and asked if I knew where to get a replacement barrel cover, as his was in pieces all broken up.

That barrel cover is not only NLA, but more than just a beauty cover; it actually spins 180 and acts as a handle to help break open the barrel. So there’s a spring in there, a piston rod, an attached balance weight, and some grub screws. I’ve seen the drawings of progress from Eli’s. it’s going to look exactly like the factory piece did. Eli’s is definitely not a “ here, this should be good enough” kind of guy. It’s all about detail and getting it to complete customer satisfaction with him. 

 

[tibor]

excuse my stupidity..do these replace the magazine..speed loader..whats the purpose?

 

[Bigragu]

It makes refilling the magazine quick, especially in a competitive shooting scenario. Like all other speed loaders even in centre fire pistols you still need to load the loader, but it’s main purpose(a speed loader) is to load the actual magazine fast. 

You could say why not just invest in more magazines? Yes, $70 for a side shot fix mag vs a $25 -$30 speed loader, it’s a no brainer. One could invest in two speed loaders and get by with just one factory mag.

 

[tibor]

thanks for the reply..

I have some 3D printed magazines that work flawless..I think $40...not for the large magazines

I guess its a give and take.