I have been trying to use ChairGun but it isn't accurate. Is anyone else having this problem? I'm using the ChairGun app on my iPhone. Also, for those who have the Athlon Btr 6-24x50 moa what recticle are you using on the app?
ChairGun
- Thread starter Topcat
- Start date
G
Guest
Guest
What issue are you having with CG?
Is this the reticle you have?
http://athlonoptics.com/product/argos-6-24x50-apmr-ffp-ir-mil/
Upvote 0
No.. I have the Moa recticle. When I enter in all the specifications it's not what I get in the field! ChairGun states in 1.5" low at 50yds but actually I'm dead on at 50.?
Upvote 0
Be sure to key in your zeroing distance. Otherwise, the holdover it tells you will be incorrect.
The field you fill in is called "zero range" with the distance you zeroed your rifle at. Make sure you have feet/yards/meters selected correctly.
The field you fill in is called "zero range" with the distance you zeroed your rifle at. Make sure you have feet/yards/meters selected correctly.
Upvote 0
G
Guest
Guest
Are you selecting the pellet from the supplied pellet database?
Have you set your far zero to your actual zero range?
Have you set your muzzle velocity?
Is your sight height set correctly?
I don't believe there is any reticle you can set in the chairgun app that comes close to matching an MOA reticle.
Upvote 0
G
Guest
Guest
It also only uses Hawke scopes, since it's their program. You also have to set the distance from scope sight centerline to bore centerline.
Upvote 0
Yep, I also had to play with the app until I had everything entered and then it was/is right on.
Upvote 0
I shared a write-up here before that explains how I use the computer version of Chairgun to work effectively for me. Here is the link: http://www.airgunnation.com/topic/a-primer-on-properly-setting-up-chairgun/
Upvote 0