So. I was excited to find my valve stop in the mail today.
I immediately set to finishing the power kit install for the M3. I needed to install a new pin probe because the one from the fx kit bent. Which i thought odd because of my mishap with the valve stop i didn't even cycle the action but a couple times with the fx pin probe installed. I thought ahead and ordered a Nielson ammo pin probe while i was waiting for parts.
BUT
Turns out there was only one alignment pin on the fx probe block. So i cant install the nielson pin prob or even reinstall correctly the fx pellet probe because of alignment issues?!?!
I called fx and customer service rep put me on hold to connect me with a tech but the call was disconnected and when i called back no answer. Ive been more than patient. My gun has been unusable for 3 weeks. The wrong part was orginaly sent out when first contacted fx. I bare some blame as i didnt use an order number. But squirel seasons ends this month. kinda want to drop some tree rats!
Oh i also ordered a barrel grub screw through the site but nothing on that. I did however find mine. i place everything in my case as i remove it and it turned up after turning my case upside down.
Also. Is there a guide on installing the neilson pin probe? and it seems like the threads on one side of the probe block are harder to screw in then the other which is concernedly easy?
Any and all help would be much appreciated? FX? Neilson? Forum Members?
Really like to get my gun back together and in working order some time this year! :/
I immediately set to finishing the power kit install for the M3. I needed to install a new pin probe because the one from the fx kit bent. Which i thought odd because of my mishap with the valve stop i didn't even cycle the action but a couple times with the fx pin probe installed. I thought ahead and ordered a Nielson ammo pin probe while i was waiting for parts.
BUT
Turns out there was only one alignment pin on the fx probe block. So i cant install the nielson pin prob or even reinstall correctly the fx pellet probe because of alignment issues?!?!
I called fx and customer service rep put me on hold to connect me with a tech but the call was disconnected and when i called back no answer. Ive been more than patient. My gun has been unusable for 3 weeks. The wrong part was orginaly sent out when first contacted fx. I bare some blame as i didnt use an order number. But squirel seasons ends this month. kinda want to drop some tree rats!
Oh i also ordered a barrel grub screw through the site but nothing on that. I did however find mine. i place everything in my case as i remove it and it turned up after turning my case upside down.
Also. Is there a guide on installing the neilson pin probe? and it seems like the threads on one side of the probe block are harder to screw in then the other which is concernedly easy?
Any and all help would be much appreciated? FX? Neilson? Forum Members?
Really like to get my gun back together and in working order some time this year! :/