Can you attach any scope to an airgun? Even high-ends from real military weapons
- Thread starter newuser123
- Start date
Short answer - yes.
Most airguns come with a picatinny rail which is a military standard for the US and much of the world. Some even come with Keymod and M-Lok rails. So adding most military hardware to an airgun is possible.
Most airguns come with a picatinny rail which is a military standard for the US and much of the world. Some even come with Keymod and M-Lok rails. So adding most military hardware to an airgun is possible.
Upvote 0
Also depends on what type of air gun you’re using. Higher powered spring powered rifles can break even the best of powder Burner scopes.With a PCP, CO2 or Multi pump you will be fine because of very little to no recoil.Spring powered have double recoil and are hard on scopes that are not designed for them.
Upvote 0
PCP's, yes. I put my Nightforce BR 12-42X56 on one of my PCP's but I took it off right away, it seemed silly to mount a scope that cost X5 more than the gun it was on.
Upvote 0
No,unless you have the right mounts and it is springer rated.Also beware of the weight and eye relief of the scope....
Something called matching=intented use,distance shooting,mounts, etc. can all be a factor...
That said, many different types of scopes can be used for air rifles.....
Something called matching=intented use,distance shooting,mounts, etc. can all be a factor...
That said, many different types of scopes can be used for air rifles.....
Upvote 0
Valid point on the springers. They’re of a different scope killing breed. Clearly my response was intended towards PCPs.
Upvote 0