Can the .22 JSB 33.9 gr Beasts play nicer with Uragan mags?

[-Blue]

I just got my Uragan standard in .22 and see some initially promising results shooting JSB 33.9 grain Beasts.

My problem is that they are a little too long to rotate in the magazine making it impossible to do more than single load to shoot them. Has anyone else ran into this problem and figured out a better solution than load one, shoot one, pull the magazine and repeat?

 

[ctshooter]

Yeah - I just tried in one of my magazines and same thing.

Worst comes to worst you can get a CARM single shot loader: https://www.carm-magazines.com/single-shot-loader-for-agt-vulcan2-uragan-air-rifle.aspx

 

[Healthservices]

Im in process of sending my magazines to elis so he can make some single loaders. 

 

[ctshooter]

Im in process of sending my magazines to elis so he can make some single loaders.

Elis seems to be the man when it comes to 3d printed parts.

 

[igolfat8]

Elis who?

 

[-Blue]

I'm unfamiliar with the single loaders. Is there a "flip out" to load function which doesn't require pulling out the whole magazine (thus making it a step or two simpler than using the factory mag)?

I just ordered a CARM magazine that will be cheaper to attempt thinning the back plate to try gaining a little more room inside for the longer Beasts.

 

[-Blue]

Quick update...

The Carm magazines CAN be successfully modified to accept Beasts. I took the cover plate off and sanded a shallow channel on the inside in order to gain the tiny extra room for the length of the Beasts.

 

[mercado]

I don't think is even worth trying...the redesigned shoot well just up to 60+y but not 90+ even going 950fps... so I imagine those 34g would do the same short distance well not to good past 50y .. I think they might do well in a faster twist because it's length..rti work on a twist rate specifically to stabilize the redesigned at a longer distances in order to that pellet to work..so when I purchased my uragan. 22 was not expecting to shoot redesigned even less the 34g monster..knockout 216 ..pinpoint acurate up to 200y as far I could shoot it.... in my condor barrel not even at 1050fps those 34g fly straight .past 50y .. but redesigned do well from that barrel at that speed...the 34g monster I only seen Ernest row do a great group from one of his HP Fx but with a different twist..

 

[-Blue]

I don't think is even worth trying...

Well, to quote the Dude, “that’s just, like, your opinion man”  
I’m having trouble reading your post but I appreciate any and all attempts at helping.

I’m still in the get to know each other phase so my opinion is that everything is worth trying. I’m still playing around with holds, rests, projectiles, and this is still at its tune coming to me from Tony (which so far is just what I asked for) I may get into tweaking the tune after it breaks in and settles itself.

I played around last night at 30 yards to check the job I had done to the CARM magazine and compared the most accurate pellet so far (JSB Jumbo Heavy 18.13) against the Jumbo Beast 33.96 which showed promise single loading.

I’ll evaluate as I back up from here but from what I see it’s definitely worth pursuing further.

I have to note that I have not been able to try any Monster REDESIGNED yet and am really looking forward to seeing how they compare to everything so far.

small grid squares= 3/16”

Here’s the back of the target.