Can bssp thread fix in m10?

[ImpactX]

I heard the threads on the tuxing gold filter are m10. Correct me if I'm wrong here. I am trying to find a fitting for it and all I can find is npt this and npt that. Everything is npt thread. Getting so annoying searching hours to find its all in npt threads. After like 3 hours searching I finally found a bssp thread fitting that I needed. Would bssp thread fit on the tuxing gold filters? 

 

[Long_Gun_Dallas]

M10 is standard on that side of the world

 

[Bigragu]

Nope won’t work. I had to go to Allie express to source M10 fittings. Also went thru this trying to look for a different set of gages for my LCS SK19, as those gage threads are M10

 

[ImpactX]

Not sure why they can't use 1 standard fitting on these quick fill for pcp.

I find there are npt, nptf, bsp, bssp, m10. Etc. They are all 1/8 fitting, should just stick to 1 standard thread.

 

[Mrmetals]

I've got them from Mcmaster Carr. Metric pipe fittings, that is.

 

[Healthservices]

Not sure why they can't use 1 standard fitting on these quick fill for pcp.

I find there are npt, nptf, bsp, bssp, m10. Etc. They are all 1/8 fitting, should just stick to 1 standard thread.

Even m10 is not just m10 as some are sealed at the base of thread with a o-ring and some are sealed top.

Its best to get part first as the descriptions are many times wrong a well. 

Like being advertised as bsp when it is bspt (tapered) or npt when it is bsp. It does get a little irritating and you will end up with a bunch of unused fittings and why sometimes it's better to go with Amazon for ease of return. 



Allen

 

[Healthservices]

And don't just say fug it and cross thread the part, adding some pipe sealant thinking it will work. Get the right fittings as this is very high pressure you are playing with! 

People have gotten hurt assembling things wrong and then blaming the equipment.



Allen