Can AnyOne Look At This Fx Impact Probe Location Please

[RonT]

After Installing the Power Plenum I haven't shoot it but,

this is the one location thats have me wondering about if I am good to go?

Having no leaks. Looking at the pellet probe in the closed position do I need

to make any adjustment to the probe position?

Thanks

RonT

 

[cfs916]

https://youtu.be/zeTjMN0vX9A

 

[FX-USA]

Hi Ron, 

If you are worried about placement before you go ahead and start shooting, feel free to send us your information via DM ( NAME, PHONE, EMAIL) and we can get tech to go through the procedure with you, or you can call our US East coast location at North Carolina, Phone: +1 866 639 0772.

regards

FX Airguns Customer Service Support

After Installing the Power Plenum I haven't shoot it but,

this is the one location thats have me wondering about if I am good to go?

Having no leaks. Looking at the pellet probe in the closed position do I need

to make any adjustment to the probe position?

Thanks

RonT

 

[capefeargunr]

https://drive.google.com/file/d/0B0Ph4Q8M-S89dkNXSFI2VG8xYTA/view?usp=sharing

Not sure if this link will work. May need to cut and paste. Good troubleshooting guide and reference.

 

[schlupsa]

Ron-

Probe seems way too far back. My 3 month old Impact had a loose pellet probe (cocking?) rod and had walked the probe so far back it was pushing the shoulder pad away from gun while cocking! After removing the top plate and cocking rod assembly I measured the transfer port depth in the barrel and adjusted probe rod so port in probe lined up perfectly with port in barrel. The front of the pellet probe block should be almost flush to the black housing with cocking lever in full forward position.......maybe 1/32'" back from flush. Don't forget to loctite both ends of the rod.

-Steve C.