Burst disc

[Alpo007]

My gx compressor runs but no air comes out..Could it be a burst disc? How do you replace them?

 

[delooper]

My gx compressor runs but no air comes out..Could it be a burst disc? How do you replace them?

Probably depends on the model. I bought a GX CS2 that came with a burst disc. Thankfully it came with a replacement. On the CS2 the disc is close to the pressure-release valve on the hose.

 

[6gun]

My gx compressor runs but no air comes out..Could it be a burst disc? How do you replace them?

If it's not the disc it could be an intake stage valve. Still ez enough to do.

 

[Gerry52]

Don't just ASSUME there's a leak coming from a certain point. Leak test & dead-head your compressor to make sure. IF it's the burst disc replacement is usually very easy. Should be one nut holding it in place (but I'm not familiar with GX).

 

[Normkel]

Don't just ASSUME there's a leak coming from a certain point. Leak test & dead-head your compressor to make sure. IF it's the burst disc replacement is usually very easy. Should be one nut holding it in place (but I'm not familiar with GX).

Good call! GX3 has the burst disk in the hose swivel as in the photo below. The CS2, IIRC, is under the air block which has the pressure gauge and Foster coupler:

 

[Alpo007]

How do you replace the burst Disk on the gx-E-cS4. Where is it located?