Nice Tom! This one is on my wish list. Hope you will be able to give some feedback in the near future. I’m certainly interested in your thoughts."Tominco"Nice video Joe!
I just got one of these with my new Diana AM03 Stealth! I'm looking forward to putting some rounds through it.
Tom
"jimbo1947"I had same problem with the UTG DNT06 rail. I used the UTG DN034 drooper rail made for the T05 trigger on my 34 with the T06 trigger. DN034 has almost 20 in elevation at 30 yds. It fits if you grind the shoulder off one end. Gives you plenty of elevation.
Joe's response was spot on. Sorry if my post was misleading, Introducing an additional variable (moving mount) is never a good thing. I would never claim that it does anything to make a gun more accurate, My 2 most accurate springers are a Diana 54 and an HW 97. They both have ZR mounts and it does not appear to have had any negative effect on either. I first used one on the 54 to protect a fairly expensive Bushnell 4200 elite. The 97 got one to protect a cheap UTG 6-24. I would not put one on a PCP since there is no need but, I would put one on another springer in a heartbeat, even one I would compete with."nced"Sorry Joe, the reply was to this comment from Lewis "My 2 most accurate springers both have ZR mounts. All I can say is it works for me."
To make such a comment I was wondering is both the "spring loaded mount" and a fixed solid mount were used on the same gun.