BT65 first PCP

[maverick6805]

Just purchased my first PCP after a year and a half of researching, saving, debating, re-saving, and bought a hatsan BT65 qe .25 . Now, first off, I wanted an FX bobcat MK2 .30, but that'll have to wait for tax time. So here are my questions. A: can the shroud be removed and a silencer fitted? B: anyone out there proficient at modifying these? I know of BWalton, but I'm looking for a custom stock down the road. Regulator, possibly more power, without sacrificing accuracy, I don't know a whole lot about these rifles, other than they are fascinating and have taken my heart away from my powder burners.... TIA

 

[Imold]

I have the BT65SB Elite QE also but I haven't touched it being it shoots nice the way it is plus I'm out in the country so I don't worry to much about the noise level.

 

[Hynzie]

First off Congratz and enjoy ,,i would text DONNIES FLORIDA hes up in the rolling banner above,,he should have the info you need,,hes top notch pat

 

[Mohannad]

Congrats on your purchase.
hatsan bt65 was my first pcp 3 yrs ago.
At the beginning i noticed the vertical grouping so i figured i needed a regulator.
I purchased altaros regulator and with jsb 18gr i can put a pellet on pellet group @ 30m. It takes 3 min to install it.
Never had a leak. Wonderful airgun.
Since it is a heavy airgun, i would recommend a light scope to keep its balance.

 

[maverick6805]

Thanks, I ordered an athlon 6-24 x 50 Argos FFP for it, and a utg bipod. I just don't like the look of the shroud. Does anyone know if they make an extended air cylinder?

 

[Seth0764]

I have the bt65 qe .25 it's very quite as is. Unscrew the tip take out the baffles there is a 14mm nut remove nut and the shroud slides off