BSA ULTRA SE - Question About Buying

[SuvosQuvos]

Hi guys,

I want buy buy BSA ULTRA SE left handed bolt in Ambidextrous stock.

I wrote to BSA if you can buy it with the bolt on the left they wrote back:
" Hello,
Thank you for the email.
We can supply the R-10, Ultra SE and Scorpion with an Ambidextrous stock ant bolt situated on the Left.
These are available to order from all good BSA Dealers.
Best regards
BSA CUSTOMER SERVICE "

I'm looking in internet shops. Many stores offer this model with a screw on the right. The specifications include "Bolt-action (can be changed from RH to LH!)" I have a question.
If I buy this rifle with a screw on the right, can I change it on the left or not? If so, won't the change cause problems loading the windbreaker?
Apparently, in new models just unscrew the bolt and screw the left side bolt?

Can anyone tell me where and how to buy BSA ultra SE ambidextrous with bolt on left side?

I am looking for looking and I can't find anything.
I am asking for help because I am powerless 

Please Help Me.

 

[douger]

I believe the bolt can just be changed from the right or left side just by taking the rear bolt handle out and turning it to other side there's a guy in MI called pressure pneumatic or high pressure pneumatics not to sure on his web site but I thought there was one in the classifieds from few weeks ago id check that one out as he might know the number of the dealer he bought hid from look on amazon if all else fails 

 

[Arzrover]

AOA is the BSA rep in the US now. Call and ask. If they don't know , I'm sure they can just look at one and tell you. 

Bob

 

[Chief]

High Pressure Pneumatics in Harrison, Michigan

I've bought a couple guns from him.....Good guy to deal with

has FX, Brocock, BSA, and others

 

[NRN2015]

Hi SuvosQuvos,



the bolt handle can be flipped, but it will not be true left hand bolt. When flipped to left, the bolt will need to be manipulated in the same direction as the right hand bolt.

 

[Vetmx]

I have an Ultra SE. The bolt handle is a friction fit, no splines or anything. You can adjust its height any way you want. But if you rotate it all the way over to be left handed, it will look weird. You can’t take the bolt handle off and flip it. The probe side of the bolt handle is a cone shaped hole. The screw side is a much smaller hole and not cone shaped.

 

[Chief]

Ebay UK has a possible solution...a straight custom bolt handle for most BSA's

For some reason the link won't post...sorry

 

[Airgun Advisor]

As a left handed shooter, I don’t find the bolt on the right side to be an issue. Obviously this is personal preference but thought I would share my experience. AoA is who I dealt with.