Is there a way to depressurize a Buccaneer without firing until the pressure is down? Or are there disassembly schematics? I just want to remove the stock so I don't puncture anything when I drill the hole in the wood stock to mount a swivel for a bipod and I don't want pieces falling out of say, the trigger mechanism.
BSA Buccaneer
- Thread starter dark1961
- Start date
You don't need to de-gas to remove the stock. Mine has T-20 torx screws though, so make sure you have the proper tool for yours. just remove the rear trigger screw and the front stock screw and lift it out. The Airgun Depot video for the Urban hammer screw adjustment will show how it's done. Nothing will fall out.
Upvote 0
G
Guest
Guest
Eddie is correct, I did my Urban (Urban == Buccaneer aside from the stock) and it's very simple. Removed the stock, ground down the bevel in the synthetic stock on a bench grinder for a flush fit of the rail, and mounted it. I removed the stock screws, flipped the rifle upside down, and pushed it out using a dowel rod in the stock screw holes.
Upvote 0