Brocock concept light Xr. Stiff trigger anyone else?

[Jld1969]

Just got a new concept Xr I find that the trigger is very stiff even when I adjusted the second stage is approximately 4+ pounds is this normal does anyone have a new concept light XR I'm just trying to figure out what's going on with the trigger? And if this is normal?

 

[douger]

shouldn't be that much are you going the right direction I do know the bantam and hr versions are not that good of a trigger and temperature sensitive so be careful 

 

[L.Leon]

shouldn't be that much are you going the right direction I do know the bantam and hr versions are not that good of a trigger and temperature sensitive so be careful

So the triggers are temperature sensitive on the Bantam HRs? Haven’t had those issues with either my Compatto or Bantam. To the OP 4+ pounds on the trigger is too heavy. You should be able to lighten it to half that. 

 

[Jld1969]

I adjusted the trigger to the lightest pull the first stage is great but the 2nd stage is about 3 pounds am guessing maybe just under? now I am going to go back to AOA and see if all them is like this if so am not sure I will keep it i think it's a hunting stile trigger I don't like a heavy trigger. I will keep everyone posted 

 

[douger]

yep mine went to unsafe after different temps 

 

[Jld1969]

Ok I did found out that in my brocock concept light XR that the trigger weight is about 2pd. 6 oz. they say it's a hunting trigger this was from Ham. Who did a review that makes sense now I will say it has a very crisp 2nd stage brake. But am just not used to it am a target trigger stile kind of guy on all my triggers I don't like hard pulls even hunting it makes me pull my shot every time. But it is nice for a hunting trigger. Hope this clears my questions I had about the trigger now that I got more info. Thanks 

 

[BigTinBoat]

I lightened my Compatto trigger by removing the spring and using 2 Rare Earth magnets. It's pretty sweet now.

 

[Jld1969]

Ok update after a few shots and a little tune up the trigger is now very nice has a crisp brake at 2 pounds. Am loving this rifle 

 

[Alandaniel1947]

I have the Brocock concept XR lite and the trigger is bad, in my opinion. Stiff would be an understatement. Plus, I’ve tried to adjust it with zero luck. The way the stock fits over the second stage adjustment you cannot back the screw off enough to achieve a good pull weight for target work. The stock fits so close that nearly any change in the screw position causes the stock and the screw to collide jamming the mechanism. Pretty stupid if you ask me. Didn’t Brocock know the air rifle would be used for shooting targets? The pull weight is so bad that it impacts the rifle’s accuracy. A stiff trigger will change the point of aim.

If anyone has a fix for this please let us know! And Brocock, you have messed up an otherwise good air rifle.
AD2

 

[Jld1969]

Yes I have one and if you have the trigger stone polished it's amazing. Better then any trigger o have used. But I had mine done at AOA when I purchased my airgun. Kip done mine ask him to do yours 

 

[Sky King]

I adjusted the trigger to the lightest pull the first stage is great but the 2nd stage is about 3 pounds am guessing maybe just under? now I am going to go back to AOA and see if all them is like this if so am not sure I will keep it i think it's a hunting stile trigger I don't like a heavy trigger. I will keep everyone posted

I could not find images/video etc on how to adjust trigger on Concept or Atomic. Can anyone help?

 

[TMH]

I could not find images/video etc on how to adjust trigger on Concept or Atomic. Can anyone help?

Those are both XR series guns? Brocock gives instructions in their user manuals, which can be found here:

https://brocock.co.uk/user-manuals/

Info like this:

 

[Sky King]

That was the first place I checked but the images show don't apply to the Atomic, at least the one I have let me know if you want me to take a picture to show you as a matter fact I will and I'll attach it here.