Brocock Bantam reflex moderator

[randy_68]

I just bought a like new Brocock Bantam with the reflex moderator on it. I love the gun but sure would like to quiet it down a bit more. How is the reflex installed on the shroud? Appears to be glued but not sure. I just assumed it was screwed on but it wont budge

 

[sonny]

not sure about the brocock but... my impact shroud was lock tighted on the threads and you have to use heat to melt the lock tight to un thread it ie a small torch.

 

[BigTinBoat]

I just bought a like new Brocock Bantam with the reflex moderator on it. I love the gun but sure would like to quiet it down a bit more. How is the reflex installed on the shroud? Appears to be glued but not sure. I just assumed it was screwed on but it wont budge

If it's like the Regal Reflex (I would think it should) the end of your shroud should be threaded 1/2-20 and the Reflex should be screw on to that. If you got it from AOA then they likely used thread locker.

 

[Centercut]

Yep, it’s just screwed on there. And yes, there is a 1/2”x20 male thread on the end. Recommend a DonnyFL Tatsu. 

 

[Skip-in-WV]

My Bantam came without one. I made mine. It just screws on.

 

[randy_68]

Thanks guys. I thought it was screwed on but it must be loctited.

 

[rangur1]

yea, have heard about issues regarding reflex mods. not to effective, donny fl will help with that.

 

[douger]

you might have to use a hair dryer to heat it up and yes depending on how quiet you want it I had a tatsu then tried the shogun its longer but way quieter id personally put on the sumo if I still had mine 

 

[Centercut]

Depends on caliber. For a .177 the Tatsu is more than quiet enough. And it’s short!!!