I have a leak around the gauge. The gauge won't easily come out. Does it have thread locker on the threads. I'm afraid it will damage the threads if I continue trying to unscrew it..
Brocock/BRK Brocock Bantam Pressure Gauge
- Thread starter Skip-in-WV
- Start date
I have 3 Brococks and they all just unscrew. Someone my have used silicone or thread locker on it if it leaked. It should have a special metal washer with a rubber insert under the gauge and that could have gone bad.
Upvote 0
Yes, de-gas the rifle before removing the gauge! I had a small manometer leak on my Sniper XR but fixed it with some teflon tape.
Upvote 0
Skip, contact AOA and they will help you as they are really good with their support of their products.
Upvote 0
Apart is mostly closed for RMAC until next week. Got the gauge off. Just the gauge. The nipple is still in the gun. I suspect replacing the drop block is the best solution now. It would cost more for AoA to dig it out.
Upvote 0
I wonder if someone used thread lock on it? Or do you think it was cross threaded and damaged when originally installed at the factory? That could be why it was leaking.
Upvote 0