Brocock Bantam Adjustments

In order to adjust the striker in the hammer it is necessary to remove a screw under the rifle to remove the cover that holds in the hammer spring. Loosen a set screw in the hammer and, insert an allen wrench to adjust the striker. Why not drill a hole in the cover to permit adjustment without removing the cover/cap? Have any of you made this modification? It sure would make tuning easier?
 
I have a Compatto also and was toying with the idea of a regulator to increase shot count. Do you think that with the proper adjustment, you will get a significant increase in shots per fill?


Make sure you can get the cylinder apart before purchasing the regulator. I had a Compatto and couldn't not get it apart. I think they torque them to a coupe hundred ftlbs.
 
Mine came apart easily, and went back together finger tight. I put the dowdy washer next to the block to get everything to line up. If you buy it on ebay look for a coupon. They usually run from 10 to 20%. I got 15. It paid for the shipping.

I know a guy in Ohio that says he gets over 200 shots with the Alteros in-line regulator. But, I'm still messing with mine. If I can get 70 good shots (enough for a match) it will be all I need to get out of it.