Brocock 2020

Meet the XR line!

1583353560_3033498495e600ed8201806.03348564_Screen Shot 2020-03-04 at 2.15.46 PM.png


1583353554_7671029885e600ed23295a2.32576466_Screen Shot 2020-03-04 at 2.10.46 PM.png


1583353557_5552437735e600ed5a203d1.97277931_Screen Shot 2020-03-04 at 2.14.18 PM.png


1583353555_3277407995e600ed3e005b7.88196963_Screen Shot 2020-03-04 at 2.13.02 PM.png


1583353556_18758493915e600ed475ca45.62568182_Screen Shot 2020-03-04 at 2.13.14 PM.png


1583353558_15503988045e600ed65ad148.09154646_Screen Shot 2020-03-04 at 2.14.38 PM.png


1583353558_388680935e600ed6e1d3f3.37048753_Screen Shot 2020-03-04 at 2.14.55 PM.png


1583353557_14758521085e600ed509d252.41510702_Screen Shot 2020-03-04 at 2.13.59 PM.png


1583353559_5291907785e600ed788df69.81382404_Screen Shot 2020-03-04 at 2.15.33 PM.png


1583353554_8007338215e600ed28a9904.03161348_Screen Shot 2020-03-04 at 2.12.05 PM.png


1583353555_13561994535e600ed3017586.48522896_Screen Shot 2020-03-04 at 2.12.15 PM.png


1583353553_10627491835e600ed14cacb9.81005277_Screen Shot 2020-03-04 at 2.08.59 PM.png


1583353552_13081662585e600ed089b1d0.36771655_Screen Shot 2020-03-04 at 2.08.15 PM.png

 
Free feedback:

I own a Commander Hi-Lite and a Concept Lite, they are exceptional *but* damn the fill probe on the Concept Lite. I'd like to see something similar to the screw off/slip off cap on the end of the air tube with a Foster fitting like on the Daystate.

I'm still undecided on the side lever since pins are easy to lose and bolts are a bit more difficult. I know Brocock makes quality gear and I've been extremely happy with my air rifles but the whole side-level stuff seems like copying Special FX.

If we look across the telcomm industry, especially portable devices, we see standards-based connectors. I'd like to see a standards-based fill connector such as Foster fittings versus fill probes with annoying check valves built into air tubes.
 
You can get a reg for it. Its easy to drop in. I did with mine.



Yeah...I hear of people doing that but haven't seen any before and after shot strings to see if it justifies the cost and effort. AoA suggested installing one but said it would not add any shots/fill. I would love to see some real world numbers if you have done this.

I can't seem to find any of my old shot string data so I forget my # of usable shots. I do fill to the Brocock recommended 240 bar (3480 psi) and refill after shooting 3 magazines (30 shots) which is where I recall noticing the velocity dropping off.
 
You can get a reg for it. Its easy to drop in. I did with mine.



Yeah...I hear of people doing that but haven't seen any before and after shot strings to see if it justifies the cost and effort. AoA suggested installing one but said it would not add any shots/fill. I would love to see some real world numbers if you have done this.

I can't seem to find any of my old shot string data so I forget my # of usable shots. I do fill to the Brocock recommended 240 bar (3480 psi) and refill after shooting 3 magazines (30 shots) which is where I recall noticing the velocity dropping off.

i have some numbers if u are interested in seeing them. although i turned my power down on my .22 to 780 fps with the 15.89 hades and get 5 mags on the reg. not sure what i would get at full power.

before the reg i had a spot in the shot string with a flat 50 shots but it was only at 680 fps.
 
i have some numbers if u are interested in seeing them. although i turned my power down on my .22 to 780 fps with the 15.89 hades and get 5 mags on the reg. not sure what i would get at full power.

before the reg i had a spot in the shot string with a flat 50 shots but it was only at 680 fps.



Yes, love to see the shot string to see how stable it is. Hopefully you have some before/after numbers.