BRK Ghost O-Ring size list

Does anyone have a list of o-ring sizes for the BRK ghost?

All I can find on their website is the exploded view diagram.
It calls the o rings out by number but has no corresponding size references.

I know there are "kits" available with all the o-rings, but I'd like to buy my own and know the sizes.

Below is what I found on the BRK site.

Thanks,
Brian

View attachment Ghost-Diagram.pdf
 
Does anyone have a list of o-ring sizes for the BRK ghost?

All I can find on their website is the exploded view diagram.
It calls the o rings out by number but has no corresponding size references.

I know there are "kits" available with all the o-rings, but I'd like to buy my own and know the sizes.

Below is what I found on the BRK site.

Thanks,
Brian

View attachment 440590
@BRK
 
If there are kits available, buy one kit then pull all the dimensions with a set of calipers. Easy stuff.

If you’re not wanting to do that, buy the kit, send it to me and I’ll do it for you and create you a list.

Obtaining o ring sizes and stocking up on o rings is all part of the game with this hobby
I agree it's an option but I don't want to reverse engineer orings from a source which probably took measurements from in use/pre installed orings which may have already taken a set.

The guns been out long enough I was hoping someone has already been down this path. I'll share what I find of course but next step is probably to contact a dealer to see if they have the sizes.

It's frustrating BRK hasn't made this public.
As Bigragu said, knowing oring sizes is a necessity in this hobby.
 
  • Like
Reactions: Dewy
Considering op’s not replied to my comment it’s hard to give someone the correct answers without details
I don't suspect Rc4fun was talking about me when he said he's dissapointed there are no answers yet. By all means if you have the sizes. Please share. I use. 22 and .25 cal. I suspect most of the o rings are the same aside from the breech/probe which is caliber specific.
 
  • Like
Reactions: rc4fun
This was my best attempt at the orings in the valve....

 
  • Like
Reactions: rc4fun
This was my best attempt at the orings in the valve....

Thanks Franklink
 
  • Like
Reactions: Franklink
Sorry for late reply, hope this helps

IMG_9222.png