Brand New JTS Airacuda Max Leaking on 1st Fill?

[bfloyd1095]

Hi Guys
Just got the new JTS , went to put air in it and its pissing the air right back out of the fill nipple
Any quick and dirty fix ideas?
Thanks

 

[WorriedMan]

Try a drop, or two, of silicone oil in foster fitting end, one way valve most likely stuck. WM

 

[Gerry52]

What Worried MAN said. Just a couple drops. You might want to try GENTLY pushing that internal valve in the nipple (I'm assuming it's a male foster) with a paper clip or like if JUST the couple drops of silicone doesn't free it first.

 

[bfloyd1095]

Thanks Guys..
I have had the problem in the past with a few guns, usually just have to cock them then fill them.
This time was different on the JTS, Oil seems to have done the trick, holding 3000 for almost an hour now..

On a side note, Good Lord the barrel on this was FILTHY... spent most part of an hour cleaning it and used a total of 28 patches, crazy man...

 

[Motorhead]

Tighten BOTH pressure gauges

 

[bfloyd1095]

Tighten BOTH pressure gauges

Yeah since it was a leaker out of the box i went ahead and tore it down after all.
It was holding after the oil in the foster but while i was waiting did a little troll on the Youtube and saw where the china orings left a little to be desired and being i happen to have 2 brand new fully stocked oring assortment containers with every damn oring known to man i figured what the hell.

So now she has been completely resealed with Good Quality orings

Thanks again for all the input..

I'll let ya'll know my thoughts after i get some range time on it..