Bottle setup

[smith007]

Got a Yong Heng about ~ half a year ago, its been great, though I've got a couple guns with small fills(every 2 or 3 mags), so I got a couple small bottles incoming

2 x https://www.id-paintball.de/en/pain...ystem/5165/dye-lt-0-8-liter-hp-system-200-bar
1 x https://www.paintball.shop/hp-air-c...standard-reg-1-1l-armotech-ultralight/a-7019/

I love the quick connect adapter on the YH I will just clip on whatever adapter that fits the gun and start the machine. Now I'd like the same setup with the bottles, but what does that look like?
Something like this?
https://saairrifles.co.za/wp-content/uploads/2022/01/Yong-Heng-220V-300BAR-Digital-Compressor-6.jpg
But "portable" between the bottles... So like, quick connect on the bottle end AND quick connect on the fill end? Does that make sense? What am I buying? . Thanks.

 

[d3vnull]

You are going to need a check valve and a bleed valve to connect foster to foster. The closest I could find in a quick search is linked below, but you would have to contact them to convert it to be female foster on both ends.

https://airtanksplus.com/product/quick-connect_in-line_one-way_check-valve_w_bleed_valve/

 

[smith007]

Something like this?

 

[d3vnull]

I believe the problem with just a hose is that when it comes time to disconnect it you still have the pressure in the line. I have never tried disconnecting a 3000 to 4500 psi pressurized line, but would think it is very unsafe .

It doesn't require much pressure from compressed air to the skin to really mess you up.

 

[smith007]

I believe the problem with just a hose is that when it comes time to disconnect it you still have the pressure in the line. I have never tried disconnecting a 3000 to 4500 psi pressurized line, but would think it is very unsafe .

It doesn't require much pressure from compressed air to the skin to really mess you up.

Riiiight ... damn. So that hose on the adapter you linked to then?

 

[d3vnull]

I was hoping others were going to chime in with suggestions. I'd contact them though and see if they would convert what I linked to just have two female fosters. Then you wouldn't even need a hose.

 

[smith007]

Copy that.

I think this would work as well...

Can be used to bleed as well.

 

[d3vnull]

Copy that.

I think this would work as well...
....
Can be used to bleed as well.

Ah very nice!