It says that for all the barrels besides they all have a carbon shroud , aren’t they using the shroud to tension?
Upvote 0
Daystate Blackwolf information
- Thread starter cavedweller
- Start date
Yea thats the same thing they say about the ghost but the 28” 25 cal is 1-30 twist which doesn’t work for slugs.
Upvote 0
I got to spend another couple of hours with the Blackwolf today. AOA set the reg at 120 bar and had the power wheel at 6.
Norman has temporarily settled on a Athlon Heras SPR 6-24x56 mounted with Burris 1.25” 30mm signature rings.
This BW has a sub 12 non FAC transfer port and the low power white spring installed.
My Garmin chronograph indicated the 13.4’s were moving at 786 FP, too slow so I kept increasing the power wheel and at 16 I hit the HFT sweet spot for this pellet weight 815 FPS - I zeroed in at 27 yards using JSB 13.4 RD’s - perfect weather and I was drilling the same hole. AOA probably tuned for 10.3's at 880 and left power wheel on 6.
Afterward chrono work, I took a shot at 10 yards to get the holdover information I needed for strelock pro to determine center of scope to center of barrel. Shazam!
Using clicks on this Mrad scope every single shot was spot on from 10 to 55 yards and I knocked down 63 targets in a row - from the bench. That was a first for me! I’m betting Norman has a real winner here with his HFT Blackwolf.
oh by the way .., this Airgun makes a satisfying Steyr type “pop” with the huggett moderator on it.
With a Weihrauch moderator shown it's a phhhht.
A reminder that this Blackwolf has a 300L air bottle and i had plenty of air left after 65 shots.
Last edited:
Upvote 0