I have never had a bipod on any of my air rifles. But I plan to put on my 25 cal syn Marauder. Do I just read the other talk below and pick one up from PA or is there any suggestions that might help me?. Thanks. Brian Smith <><
Bipod for a syn marauder?
- Thread starter briansmith
- Start date
I've found this UTG model to be solid:
UTG Bipod, SWAT/Combat Profile, Adjustable Height https://www.amazon.com/dp/B001WJ577O/ref=cm_sw_r_cp_awd_rtd5wbRCJT17D
UTG Bipod, SWAT/Combat Profile, Adjustable Height https://www.amazon.com/dp/B001WJ577O/ref=cm_sw_r_cp_awd_rtd5wbRCJT17D
Upvote 0
I have Harris bipods that I swap between guns when I need a bipod.
Just a word of caution. The synthetic stocked marauders have a tendency to pull the swivel stud out of the forend when using a swivel mounted bipod like the Harris. I went to a machine screw stud with a lock nut to avoid this problem. I made a small metal plate that fit the inside channel of the forend and used a washer on the outside between the stud and stock to create a very strong forend that the stud has no way of pulling out of.
Just a word of caution. The synthetic stocked marauders have a tendency to pull the swivel stud out of the forend when using a swivel mounted bipod like the Harris. I went to a machine screw stud with a lock nut to avoid this problem. I made a small metal plate that fit the inside channel of the forend and used a washer on the outside between the stud and stock to create a very strong forend that the stud has no way of pulling out of.
Upvote 0
Thanks again AJ. I do plan to bolt it from the inside as you suggest. I wondered about that in the Syn stock. Brian <><
Upvote 0