Benjamin P-Rod with TSS

Jump to latest Follow Reply
Mick-VA

Mick-VA

Member
Jan 27, 2017
550
28
VA, United States
Has anyone else installed the Twin Spring System (TSS) on their P-Rod and using an adapter for M4 stock?

I have a P-Rod that I had commissioned to be stretched 6 inches with longer MM hammer forged barrel and shroud, longer air cylinder, a Huma regulator, and the TSS installed and tuned.

Problem - the TSS hammer spring adjuster has different size (and no inner threads through inside of bolt)) threads and I can no longer use my RAI stock adapter.

1. Is there a different adapter or method to attach M4 stock (pix or links) 2. If not, can you recommend someone that could uninstall the TSS, reinstall the stock HST and hammer and re-tune? Someone that is skilled, communicative, timely, and follows through post sale if questions arise?

Thanks

I suppose I could take a completely new direction and use the Rapid bullpup kit and make a very light 24 inch bullpup and keep the TSS.
 
There is a new AMAZING stock being developed over on the GTA forums if I recall. It attached to the dovetails and is basically flush when at its shortest length and extends say 8-10"? I am uncertain of all details but I would absolutely look into that option..

Sorry to hear about the incompatibility with the TSS and your current config. But if you do the above you wont need to retune.
 
Upvote 0
You must log in or register to reply here.
Top Bottom
Back
Home
Forums
Resources
Menu