Benjamin Benjamin Marauder ORing Size List

[Lewis]

I'm looking for the complete list of O-Ring sizes for a Marauder. I have seen this list but it doesn't provide dimensions so that I can order several of each from the O Ring store, which is what I usually do when I start playing with a gun. Can anyone provide the sizes for each similar to the first line that lists 1.5x4mm Buna 70?

 

[6gun]

The captain oring kits are good if you can't find the list. My opinion is based off a gen 1, but using a little roto burr knife to deburr the holes in the air tube goes a long way too. 3 rebuilds in 15 years and the captain oring set has lasted the longest thus far. Just because I'm lazy and it wasn't expensive enough to go your route and they serve 2x parts

 

[Lewis]

Thank you, I did see those kits. I would like to order at least 25 of each. They always seem to fit something else later.

 

[RobBonnell89]

That list has all the sizes written on it. Some are metric and some are a standard size #. The standard are written in a reference number instead of dimensions.Kinda confusing. Example: #009 (.22 barrel oring) as show here on orings and more. Also this is cheapest place to to order I’ve found.

The marauder parts diagram online has most orings listed as well. I’m sure that yellow list is complete it’s been posted a bunch over the years.

Hope this helps I’m not the best at explaining things sometimes

Rob

 

[Lewis]

Perfect! I knew I had to be missing something.