Selling a Benji DIscovery
I am the original and only owner. Have had this gun since about 2014. It was my first PCP and later my boys learned how to shoot with it.
It is certainly used and has marks and signs of wear. No rust on the metal.
The stock has been redone a few times, and modified. The section of stock behind the black line can be removed to reduce the length of pull by about 3 inches, making it fit a kid in the 4-8 year old range pretty well. When the rear section of stock is removed, the black line becomes the butt plate. When in place, as pictured, the stock is typical Discovery length.
Gun will come as pictured with a Marauder trigger installed and trigger guard in place, and the tube spacer that prevents sear drag. Marauder trigger is about 1000X the trigger that comes on a DIscovery. I will include the DIsco trigger in a parts bag. The Marauder trigger that's on it is super light, probably just a few ounces. I'll include the "lawyer spring" that can be simply dropped in to make it a couple pounds, in case the intent is to teach a kid to shoot.
My last notes show I was getting 20 shots of about 18fpe each, filling to 1800 psi. This was with a slight amount of hammer tension added.
Gun was resealed a few years ago and holds air without leaking.
Rear fiber optic factory sights are installed. Front sight is not fiber optic.
Will also include the press fit TKO22 Moderator designed for the DIscovery. Makes it VERY quiet.
Will ship double boxed in original box.
The .22 barrel is quite accurate with most JSB pellets in the 13-18grain range. I didn't ever shoot it much as a .177, but I remember that it liked the .177 Polymags. Might need a .177 probe....I just don't remember.
Not trying to make a killing, but factoring in that shipping is likely to be $50ish....so $215 shipped to lower 48. PayPal FF or mail me a check and wait for it to clear.
Click on photos for better image...
I am the original and only owner. Have had this gun since about 2014. It was my first PCP and later my boys learned how to shoot with it.
It is certainly used and has marks and signs of wear. No rust on the metal.
The stock has been redone a few times, and modified. The section of stock behind the black line can be removed to reduce the length of pull by about 3 inches, making it fit a kid in the 4-8 year old range pretty well. When the rear section of stock is removed, the black line becomes the butt plate. When in place, as pictured, the stock is typical Discovery length.
Gun will come as pictured with a Marauder trigger installed and trigger guard in place, and the tube spacer that prevents sear drag. Marauder trigger is about 1000X the trigger that comes on a DIscovery. I will include the DIsco trigger in a parts bag. The Marauder trigger that's on it is super light, probably just a few ounces. I'll include the "lawyer spring" that can be simply dropped in to make it a couple pounds, in case the intent is to teach a kid to shoot.
My last notes show I was getting 20 shots of about 18fpe each, filling to 1800 psi. This was with a slight amount of hammer tension added.
Gun was resealed a few years ago and holds air without leaking.
Rear fiber optic factory sights are installed. Front sight is not fiber optic.
Will also include the press fit TKO22 Moderator designed for the DIscovery. Makes it VERY quiet.
Will ship double boxed in original box.
The .22 barrel is quite accurate with most JSB pellets in the 13-18grain range. I didn't ever shoot it much as a .177, but I remember that it liked the .177 Polymags. Might need a .177 probe....I just don't remember.
Not trying to make a killing, but factoring in that shipping is likely to be $50ish....so $215 shipped to lower 48. PayPal FF or mail me a check and wait for it to clear.
Click on photos for better image...
