Benjamin Benjamin Bulldog .357 (original) Shooting .35 Seneca Airbolts

Jump to latest Follow Reply
Ezana4CE

Ezana4CE

Member
Jan 15, 2021
10,767
3
7,559
Texas, United States
It’s been a few years, but I’m back at it. This was my first PCP. Not just this platform, but the same rifle in the photo. I probably haven’t shot it in about a year or a little longer and it still holds air without leaking. I simply pulled it out of storage, wiped off the oil, topped off the reservoir, removed the shroud end cap, gave the barrel a light cleaning, and started shooting.
IMG_9474.jpeg


40 yards out sitting on a bucket.
IMG_9473.jpeg


I forgot how big of a PITA it can be to remove field tips from this bag.

Each bolt was aimed at a different target so I don’t damage any.
IMG_9475.jpeg
 
Last edited:
  • Like
Reactions: maxtrouble, SLICKNICK, RM.510bigbore and 1 other person
I used to buy these but we now make our own here in our shop. . Out of the Taurus doing 651fps. Had to go with a Himus CF shaft to handle the iimpact, blew a few apart testing but we got it figured out. And yes sucks pulling out of a bag sometimes, try a 4 inch tree trunk just have to laugh and cut. We usally cut back the power to 525 -530. But even at high speed they are accurate and dont have to worry about tearing flechings apart.
IMG_20250701_210943183.jpgIMG_20250701_210947252.jpg
 
Last edited:
Upvote 0
you might just try a paper target on your bale of straw.. it's what my daughter's did.. didn't work for me, I missed the whole stack and it went inside the barn.. ended up moving a ton of hay to retrieve the one arrow I shot .. course that was with a regular bow.. I've stayed clear of arrows since..
Mark
 
  • Love
Reactions: Mike_Lenardon
Upvote 0
bthurman said:
I used to buy these but we now make our own here in our shop. . Out of the Taurus doing 651fps. Had to go with a Himus CF shaft to handle the iimpact, blew a few apart testing but we got it figured out. And yes sucks pulling out of a bag sometimes, try a 4 inch tree trunk just have to laugh and cut. We usally cut back the power to 525 -530. But even at high speed they are accurate and dont have to worry about tearing flechings apart.
View attachment 575010View attachment 575011
Click to expand...
@bthurman A few years back I approached Seneca about getting some of the older bolts with the Velcro on them. They claimed they didn’t have any to sell and had no access to them. This was during the pandemic so you may remember supply chain issues. I don't tend to tear up fletching anymore. The bolt with the torn up fletching in my photos is one I tore up a a few years back when I was figuring this all out.

That‘s pretty slick to make your own. I imagine that the Benjamin M357 would bust these bolts up pretty bad. Which is why I use the original Bulldog .357 for shooting bolts. It will get the job done for my style of hunting. I shot one of these bolts from the Bulldog .357 with a broadhead into a tree on a deer hunt once and broke the shaft just below the ferrule. I had to leave my broadhead in that tree trunk. I think it was an oak tree. I have a thread where I wrote about it. Anyhow, yea the goal is to not tear up bolts and broadhwads, hence the hay as a backstop. I have shot at a bunk-ass Block 6x6 target advertised to stop “all broadheads & field tips“, blew through it with field points and broadheads and also blew the plywood backstop behind it. I don’t think the thing could stop a tranquilizer dart. You can imagine how that went if you didn’t read through that thread.
 
  • Like
Reactions: bthurman and RM.510bigbore
Upvote 0
bthurman said:
I used to buy these but we now make our own here in our shop. . Out of the Taurus doing 651fps. Had to go with a Himus CF shaft to handle the iimpact, blew a few apart testing but we got it figured out. And yes sucks pulling out of a bag sometimes, try a 4 inch tree trunk just have to laugh and cut. We usally cut back the power to 525 -530. But even at high speed they are accurate and dont have to worry about tearing flechings apart.
View attachment 575010View attachment 575011
Click to expand...
@bthurman I just read the print on the pictured bolts In the quoted post. Are the ones in the photos bolts that you made?
 
Upvote 0
markhooper said:
you might just try a paper target on your bale of straw.. it's what my daughter's did.. didn't work for me, I missed the whole stack and it went inside the barn.. ended up moving a ton of hay to retrieve the one arrow I shot .. course that was with a regular bow.. I've stayed clear of arrows since..
Mark
Click to expand...
@markhooper It’s an option I may explore if I get tired of other targets.
 
  • Like
Reactions: markhooper
Upvote 0
Ezana4CE said:
@markhooper It’s an option I may explore if I get tired of other targets.
Click to expand...
so for context I was only 30 feet away from the open barn door 12' wide and 8' tall.. and I was aiming at 3 bales we stacked in front of the open door.. complete miss but my daughter saw it go between two bases in the barn.. it was like halfway down the stack and it went in between the bales about 4 bales deep🤣😂🤣🤣
Mark
 
Upvote 0
Ezana4CE said:
@bthurman A few years back I approached Seneca about getting some of the older bolts with the Velcro on them. They claimed they didn’t have any to sell and had no access to them. This was during the pandemic so you may remember supply chain issues. I don't tend to tear up fletching anymore. The bolt with the torn up fletching in my photos is one I tore up a a few years back when I was figuring this all out.

That‘s pretty slick to make your own. I imagine that the Benjamin M357 would bust these bolts up pretty bad. Which is why I use the original Bulldog .357 for shooting bolts. It will get the job done for my style of hunting. I shot one of these bolts from the Bulldog .357 with a broadhead into a tree on a deer hunt once and broke the shaft just below the ferrule. I had to leave my broadhead in that tree trunk. I think it was an oak tree. I have a thread where I wrote about it. Anyhow, yea the goal is to not tear up bolts and broadhwads, hence the hay as a backstop. I have shot at a bunk-ass Block 6x6 target advertised to stop “all broadheads & field tips“, blew through it with field points and broadheads and also blew the plywood backstop behind it. I don’t think the thing could stop a tranquilizer dart. You can imagine how that went if you didn’t read through that thread.
Click to expand...
I think you can detune the m357 to the original one if you change the transfer port.. I could make them for you if I had one.. actually if you had a m357 transfer port to copy and the original inside diameter of the old 357.. I believe they just drilled out the port bigger.
Mark
 
Upvote 0
markhooper said:
I think you can detune the m357 to the original one if you change the transfer port.. I could make them for you if I had one.. actually if you had a m357 transfer port to copy and the original inside diameter of the old 357.. I believe they just drilled out the port bigger.
Mark
Click to expand...
@markhooper Why would I do that when I own both? Besides, the original Bulldog is lighter to carry than the M357.
 
  • Like
Reactions: bthurman
Upvote 0
  • Like
Reactions: bthurman
Upvote 0
Ezana4CE said:
@markhooper Why would I do that when I own both? Besides, the original Bulldog is lighter to carry than the M357.
Click to expand...
oh ok well I'm sorry.. absolutely no reason to do that..only reason to do that is if you wanted to make the m357 down to the same power level as original.. sorry for the offer of help.. didn't mean to offend anyone.
Mark
 
Upvote 0
markhooper said:
oh ok well I'm sorry.. absolutely no reason to do that..only reason to do that is if you wanted to make the m357 down to the same power level as original.. sorry for the offer of help.. didn't mean to offend anyone.
Mark
Click to expand...
@markhooper No offense taken. I was puzzled by your suggestion because I didn’t mention tuning down my M357, so I asked “why would I do that?” Then I stated why I would not. In our conversation Brian and I were talking about shooting air bolts from 3 different versions of the Bulldog .357 platform. They have different power levels. You answered my question in the quoted post above.
 
  • Like
Reactions: markhooper
Upvote 0
You must log in or register to reply here.
Top Bottom
Back
Home
Forums
Resources
Menu