I really don't know but I think the nitrogen was an option and not standard. And if humidity is a concern the humidity in my house is 37%,
Upvote 0
Beeman RX-1 Gas ram
- Thread starter rrmccabe
- Start date
Its back together. Going to chrono it this weekend with a friends chrono.
Easy job really.
My schrader valve has a small leak but the o-ringed cap seals fine. Dont know if that is normal. Wish I had ordered the schrader valve now and the main forward piston seal. But I think its going to be OK.
Seals were HARD.
Easy job really.
My schrader valve has a small leak but the o-ringed cap seals fine. Dont know if that is normal. Wish I had ordered the schrader valve now and the main forward piston seal. But I think its going to be OK.
Seals were HARD.
Upvote 0
So took it up to north part of my land. Running low pressure until I get to chrono it.
50 yards into a 6x6" box. Shooting out of back of pickup with gun propped on a back pack.
10 shots fired aiming for center of box. 7 shots you can see. 2 grazed the left side of box and one cant be found.
Just pulling from a bag of pellets that are mixed and with the exception of some old Beeman Kodiak I have no idea what they are
Pretty happy about results for not touching this thing for probably close to 15 years.
50 yards into a 6x6" box. Shooting out of back of pickup with gun propped on a back pack.
10 shots fired aiming for center of box. 7 shots you can see. 2 grazed the left side of box and one cant be found.
Just pulling from a bag of pellets that are mixed and with the exception of some old Beeman Kodiak I have no idea what they are
Pretty happy about results for not touching this thing for probably close to 15 years.
Upvote 0
The real test will be the chronograph results. Not only overall power but shot to shot consistency. That will give indications of seal conditions.
Upvote 0