Hello, does anyone have or now where I could get the ( for lack of a better word) the black pistol grip cap on a beeman R1
Thanks
Joe
Thanks
Joe
Beeman Beeman R1 stock part
- Thread starter joeayv
- Start date
You nailed it. It's called a "grip cap". Unfortunately, I've got no idea where to obtain one. Maybe start by putting a Want Ad in the classifieds.
Upvote 0
Get a piece of ebony or similar. Make one. Any original you would find would not necessarily mate up perfectly to the pistol grip anyway. They are sanded with the stock when manufactured.
Upvote 0
Give MidwayUSA a look / call. Looks like they have some available.
Gun Grip Caps for Your Rifle & Shotgun | MidwayUSA
A grip cap is a small detail, but a necessary finishing touch for a repair or restoration gun project. Find a stock accent for your project today and save.
www.midwayusa.com Upvote 0
Here are 2 sites you might utilize to find those parts you are looking for:
1) https://twchambers.co.uk
2) https://www.airgunspares.com/gunspares
Maybe contact Weihraugh: https://weihrauch.co.uk/manuals
Good luck finding that particular piece.
1) https://twchambers.co.uk
2) https://www.airgunspares.com/gunspares
Maybe contact Weihraugh: https://weihrauch.co.uk/manuals
Good luck finding that particular piece.
Upvote 0
thank you all for your responses
I've been looking on eBay. i can't seem to find it.... I also look at a few other places.
there are many available. But i don't seem to see any made for beeman/weihrauch
midway has one that will work.
i think making my own will be the best option. was trying to keep it all stock... ( no pun intended )
thanks
Joe
I've been looking on eBay. i can't seem to find it.... I also look at a few other places.
there are many available. But i don't seem to see any made for beeman/weihrauch
midway has one that will work.
i think making my own will be the best option. was trying to keep it all stock... ( no pun intended )
thanks
Joe
Upvote 0
If you make it just a bit (1/16” all around) larger than the pistol grip, it looks nice and professional. you won’t disturb the original finish trying to sand it in to match up perfectly. I used to remove them and make new ones out of aluminum. Oversized them a bit, round the edges and polish to a mirror finish. Then used a polished aluminum or stainless screw. Looked really nice. Good luck. Please show us your finished project.
Upvote 0
Black GRIP CAP to fit Weihrauch HW77 & Most 80's / 90's Springers. Search under Weihrauch, for some reason AGN won't let me copy and paste the actual cite on eBay
Upvote 0