Beeman Model 1358 Bullpup: Review (video)

[Hajimoto]

Whats up air-heads
This is my video review of the very affordable Beeman Model 1358 in .22 caliber which is an underlever cocking bullpup for under $330 USD (at the time of publishing)
The Model 1358 will certainly not dethrone some of the great bullpup PCP's on the market but it does allow folks that were curious about a BP to own one.

https://www.youtube.com/watch?v=4cctqXvKewQ

Please subscribe and let me know if you have any questions.

 

[Hajimoto]

Beeman Model 1358 MOTO-fications underway!! 
Gone is the plastic air stripper and barrel shroud. It is the custom-made 1/2" x 20 UNF adapter for the DonnyFL Tanto for mouse fart quiet results. 
I used a Beileshi 1-Inch Picatinny Scope Ring Adaptor to allow for a Bipod to be mounted. 
Underlever still able to be fully used and the bipod and be removed in 1.4secs

Thanks for reading guys and gals!!

 

[kenWood]

What suppressor attachment is that ?

 

[Hajimoto]

That is one that I made on the lathe but DonnyFl has a completed adapter extender that adds more clearance at the end.

Beeman Underlever 1357 | 1358 Adapter #A86

Specifically for the Beeman 1357 / 1358 This adapter replaces the factory baffle allowing you to screw on a 1/2 x 20 airgun suppressor. You will need to remove the factory o’ring and put it o…

hajimotoproductions.com

 

[kenWood]

Do you sell your style ?