Beeman 1085 QB II first impressions

Saw the thread on GTA about the Beeman 1085 a few days ago and went ahead and ordered one. It showed up today.

It’s definitely a QB dressed up a bit. All parts should just about be interchangeable.

It comes as a cock on open rifle. The hole you would use for a cock on close QB is still on the hammer.

The bolt is a hair different. A little longer maybe, with 2 o-rings.

The rifles use the same triggers, tubes, and 15mm barrels.

The rifle comes with one multishot magazine that loads just like a Marauders. It works just fine. I couldn’t find where to get spare magazines, but good news, a Marauder magazine or a Gauntlet magazine will work too. You will have to pull the stop pin out of the slot. Mine came out super easy with some needle nosed pliers. The Marauder magazine is a little tight in the breech, but it works fine.

This .177 is getting 560fps with Crosman 10.5s using CO2 carts. No power mods done. Aside from the shroud I added, it’s a stock rifle.

I like it. I’ve always liked QBs. It’s nice to get a complete rifle for the price I might have paid for just the breech from other vendors.

I apologize, I forgot to take photos before adding the shroud and oversized bolt handle. The last photo shows the rifle with a Marauder magazine loaded.



Unfortunately, .177 is all that is available right now.

For $120, it’s a keeper I think.



1565319271_2668519855d4ce0676918a6.78928752_5B6CDBA0-0308-4F0E-80F1-1E95C1EB4996.jpeg
1565319271_4040426535d4ce0679ada38.71337154_FD86FFB8-C96F-41DF-9007-E8526C35FAC7.jpeg
1565319271_13262040905d4ce067bebf31.75406266_1DCEF419-60F0-4A66-BB99-7A23D685199F.jpeg
1565319271_18752607365d4ce067d884e4.47221145_E6709840-D74F-4257-AE65-5536B5C0A6ED.jpeg
1565319272_821166125d4ce0680fdad7.74449833_AC055E62-7C0E-4EBE-90B6-E6D2920AF823.jpeg

 
Had a chabce to shoot her yet? I have always had at least 1 qb series gun in my collection (3 at the moment) and they have all been accuraye rifles and easy to mod. I had mentioned in another post a bottle conversion would be cool as well but wonder if the revier could just bolt up to a qb79 lower.

This one is very accurate at 35y.



The receiver will definitely swap out, but you would also need to swap the hammer, cocking pin, and cock on open spacer. Total time would take about 10 minutes to do the swap.