Barrel diameter by models

Jump to latest Follow Reply
Red Wolf HP and Delta Wolf are based on 15 mm. The Standard is smaller... measures 13 mm on the one I have.
Regal and Revere are the same as the Standard RW... so probably 13 mm.
The Prophet and Priest are 15 mm as well.
USFT is 16mm
Ataman M2 or Daystate Tsar is 16mm on mine.
EVOL needs to be .5" or larger
Theoben Mk1 is 16mm on mine but 15mm should work.
Bob
 
Last edited:
Upvote 0
heavy-impact said:
Vulcan 3 .30 cal is 14mm
AGT pulled a bait and switch giving it's customers the middle finger with a way oversize barrel at .3064 so it's a great candidate for a proper .294/.300
Click to expand...
What...?

Give me a larger, outer diameter barrel every time !

Then...there's less concern about all of this harmonics, vibration, etc. that everyone whines about. No need for "STIFFENER" tubes, or ways to put the barrel in tension, or any of that garbage !

Mike
 
Upvote 0
MikeVV said:
What...?

Give me a larger, outer diameter barrel every time !

Then...there's less concern about all of this harmonics, vibration, etc. that everyone whines about. No need for "STIFFENER" tubes, or ways to put the barrel in tension, or any of that garbage !

Mike
Click to expand...
The OD is 14mm (9/16") the land and grooves are over the industry standard of .294/.300 with a groove diameter of .3064

macky -.png
 
Last edited:
Upvote 0
heavy-impact said:
The OD is 14mm (9/16") the bore and grooves are over the industry standard of .294/.300 with a grove diameter of .3064

View attachment 285014
Click to expand...

1. I said the "outside" diameter.
No need to bring up the inside diameter, wasn't part of "my" comment !

2. What's a "grove" diameter ?
What am I missing here ? Possibly something about a groove diameter ?

3. I believe you mean the "land" and groove diameters. Not the bore.

If you're gonna pick on someone...get the terms and spelling correct !

Mike
 
Upvote 0
MikeVV said:
1. I said the "outside" diameter.
No need to bring up the inside diameter, wasn't part of "my" comment !

2. What's a "grove" diameter ?
What am I missing here ? Possibly something about a groove diameter ?

3. I believe you mean the "land" and groove diameters. Not the bore.

If you're gonna pick on someone...get the terms and spelling correct !

Mike
Click to expand...
No sir, I was not picking on you at all. I respect you and the Mr Macky picture was meant to be funny. You are correct in the land and groove terms, I make mistakes now and then. I thought you didn't get my first post. No worries.
 
  • Like
Reactions: Scotty1
Upvote 0
You must log in or register to reply here.
Top Bottom
Back
Home
Forums
Resources
Menu